Well it was the 5V regulator. I changed it and the 5v power on came right up to 5V. al marquardt ampm@xxxxxxx ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, October 16, 2002 10:35 AM Subject: [TechAssist] Zenith TV?VCR TVSB1320takes a while to come on. > > This thing won't turn on when first plugged in. The voltages on the power > supply are the same when it doesn't work as when it does work. I found that > the always 5V is good but the only thing I can find is the 5v power on is > 2.6V.When I heat the power supply the 2.6V goes to 5V and the set turns > on.then it turns on all the time but the voltage is still at 2.6V.Can anyone > tell me what turns this set on and where the reset is. Cooling with freeze > after it starts working does no good. Should I just change the 5V regulator > as it seems to be giving everyone trouble?Where does that 5V power on come > from? No scat as usual and customer as usual doesn't want to put a lot of > money into it. > al marquardt > ampm@xxxxxxx > > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/