Steve, That model should be in factory service manual PV-137. I don't have it,... but I DO have PV138, for models PV4039H, PV4041H,and PV4045Y. The one I have is on Micro-fitche ONLY. It DOES use the same power supply module 9-323-04. The part numbers for the resistors you requested are : "both" 270 ohm 1/2 watt 5%, Zenith part # 63-7760. I will send you the Micro-fitche, by US "snail" mail, if you need it,..or will look up additional info for you, as needed. HTH, LLW LeRoy Westlund Westlund TV & Electronics 97 North Main "Where there's a will,... Centerfield, UT 84622-0087 There's always a way." Ph./Fax 435-528-3822 mailto:LLW@xxxxxxxxxx -----Original Message----- From: Technotronic Dimensions <steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Friday, May 21, 2004 9:24 PM Subject: [TechAssist] Zenith PV4547P4 (9-323-04) >Cannot Find a SAMS on this one. Circa 1986 Set. Need Values of R3424 and >R3425. If anyone Has a Diagram or a Scan Let me know. I did not check our >Archives yet because I think the Set is too old. Will Check Leter just to be >sure. Set Not Powering Up - Found Some Tips on Some BAd Caps, but if anyone >Has worked on this Chassis, I'd Appreciate a Chat With them. > > > >Steve Hearns >Technotronic Dimensions, NY [USA] >WWW.TECHNOTRONIC-DIMENSIONS.COM >1-877-817-9885 (Voice / Fax Toll Free - US Only) > > > >--------------------------------------------------------------------------- -- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/