R3243 is a 110 K and R3244 is an 82 K. That is an error in WINSTIPS. There is also an error in the body of your post indicating "R3443" which must be a typo. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxx ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: "Techassist" <techassist@xxxxxxxxxxxxx> Sent: Friday, March 18, 2005 1:21 PM Subject: [TechAssist] Zenith PTV RA56M91D1, no video, 9-1978 R3244 question > A tip in WinsTips says R3244 and R3243 open cause no video. The tip says > R3244 is 8.2K, I have a module back from TSM and R3443 is a 82K. Did TSM > install the wrong resistor or is WinsTips wrong? > -- > > > ******************************** > Since 1972 * > Jim Myers * > Telrad Electronics * > Fort Wayne Indiana * > ******************************** > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/