[TechAssist] Re: Zenith PTV, PV5257RK, 9-1194-1 blown

  • From: <damon101@xxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Sat, 6 Oct 2001 06:40:16 -0500


Damon Brunger
damon101@xxxxxxxxxxxxxx
Telrad Electronic Services
Ft Wayne, IN 46815

Also note my concern about this unit: The 9-1194 module was replaced
previously about 9 to 15 months before. Has anybody had a slow death occur
attributed to the High Voltage Splitter or Crts? Picture on this set was
clean/sharp. I asked the customer if they heard any snapping/arcing --Nope,
was just running and **Blink**  went out. Tell me what you've seen and
Thanks in advance.

----- Original Message -----
From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, October 05, 2001 11:42 AM
Subject: [TechAssist] Zenith PTV, PV5257RK, 9-1194-1 blown


> Zenith PTV, PV5257RK, 9-1194-1 blown
>
> Replaced the 9-1194-1 module and set turns on with sound and has B+ to the
HO transistor but no horz drive. Is the horz drive generated on this module
or does it come from the signal module. TNX for any help
>
> Jim Myers
> jr.myers@xxxxxxxxxxx
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 10-2001