Look for hi esr on bright blue caps on the 9-1193 mod.I would change ALL the bright blue caps and also check anode leads for holes. Ron Miller D.T.V. Texas ----- Original Message ----- From: <damon101@xxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, October 06, 2001 6:40 AM Subject: [TechAssist] Re: Zenith PTV, PV5257RK, 9-1194-1 blown > > > Damon Brunger > damon101@xxxxxxxxxxxxxx > Telrad Electronic Services > Ft Wayne, IN 46815 > > Also note my concern about this unit: The 9-1194 module was replaced > previously about 9 to 15 months before. Has anybody had a slow death occur > attributed to the High Voltage Splitter or Crts? Picture on this set was > clean/sharp. I asked the customer if they heard any snapping/arcing --Nope, > was just running and **Blink** went out. Tell me what you've seen and > Thanks in advance. > > ----- Original Message ----- > From: "Jim Myers" <jr.myers@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, October 05, 2001 11:42 AM > Subject: [TechAssist] Zenith PTV, PV5257RK, 9-1194-1 blown > > > > Zenith PTV, PV5257RK, 9-1194-1 blown > > > > Replaced the 9-1194-1 module and set turns on with sound and has B+ to the > HO transistor but no horz drive. Is the horz drive generated on this module > or does it come from the signal module. TNX for any help > > > > Jim Myers > > jr.myers@xxxxxxxxxxx > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.