some churches mount the projector in wall behind screen Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, February 01, 2005 12:44 PM Subject: [TechAssist] Re: Zenith PRO880 picture reversal procedure > Guess you're right, I had never heard of changing one to a rear projo. > Whadda ya do then, add a mirror, a cabinet and a screen? > > > ******************************** > Since 1972 * > Jim Myers * > Telrad Electronics * > Fort Wayne Indiana * > ******************************** > > > Leonard Caillouet wrote: > > Of course you can. Just reverse the polarity on the horizontal yokes. > > These had connectors that made it easy, IIRC. > > > > Any CRT based projector can be reversed for rear projection in this manner. > > Same for ceiling mounting vs floor mounting, just reverse the H & V yoke > > polarities. There may be geometry range problems with the latter if not > > designed to do so, but even that can be affected by reversing the > > convergence yokes in most cases. > > > > Leonard Caillouet > > Electronics World > > 1261 NW 76 Blvd > > Gainesville, FL 32606 > > 352-332-5608 > > FAX 352-332-5668 > > > > > > > > ----- Original Message ----- > > From: "Jim Myers" <jr.myers@xxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Monday, January 31, 2005 2:54 PM > > Subject: [TechAssist] Re: Zenith PRO880 picture reversal procedure > > > > > > I don't think you can change it from a rear to a front projo or > > visa-versa but you can change it from a celling to a floor mount and > > visa-versa. Once you get the covers off and locate the yoke connectors > > it should be obvious. > > > > > > ******************************** > > Since 1972 * > > Jim Myers * > > Telrad Electronics * > > Fort Wayne Indiana * > > ******************************** > > > > > > John at Main TV wrote: > > > >>I have a service call to reverse the picture on this set. The customer > > > > was > > > >>using it as a rear projector and now wants to use it for a front > > > > projector. > > > >>He originally changed it from front to rear but he forgot the procedure > > > > and > > > >>now Zenith will not give him the procedure. (according to him). He > > > > thought > > > >>it required changing a plug. I did a google search for that number and > > > > find > > > >>only sales info. At www.zenithservice.com I entered PRO880 for the owners > >>manual and it said "no such number". The customer said that is the only > >>model number on the unit. Any help appreciated, John. > >>John Mielke > >>Main TV > >>636 main St. > >>Longmont, Co > >>phone 303 776 6955 > >>fax 303 776 0792 > >>maintv2004@xxxxxxxxxxx > >> > >>-------------------------------------------------------------------------- > > > > --- > > > >>Lost Password: > >>http://www.tech-assist.org and select "Login Problems?". > >>Email Archives: > >>//www.freelists.org/archives/techassist/ > >> > >> > > > > > > > > -------------------------------------------------------------------------- -- > > - > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/