Is one of the caps you changed 10uf\350V the supply filter on the 200vdc line? dave NIELSEN ELECTRIC Wahpeton ND 701-642-8773 fax 701-642-1431 dave-nielsenelectric@xxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of walter Sent: Wednesday, July 31, 2002 10:14 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Zenith Model #SG2719TR has faint harizontal bars in background of picture. Hello techassist, Got the above t.v. in being dead and replaced C3407 and C3440 capacitors which put the set back into operation. Then found that the picture was low in contrast with faint horizontal bars in the background from top to bottom. Has anyone seen this problem before and would share what it took to correct the problem? have check some caps in the video circuit and additional caps in the P.S. -- Best regards, Walter Audio Video Service of Granville, Inc. Oxford, N.C. 27565 919-693-1066 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/