This is indeed a Hitachi set. Winstips only convergence tip is a bad connection(trace) from the flyback to Q902, the 27v regulator. Voltages you should expect on the convergence ic's are: Pin 1 0 2 0 3 -31 4 -32 5 +33 6 0 7 0 8 +28 9 1.0 10 +27 11 0 12 -28 13 0 14 0 15 0.2 16 0.3 17 -28 18 0.3 If someone can remember the Hitachi chassis no. that corrospends the schematic could be downloaded from their website. I had that info at Future tech, but don't remember, and no longer have access. HTH Walter --- Larry E <videotech@xxxxxxxxxxxx> wrote: > Hi Guys, went out on this IQB50M90W, ZP90 > chassis for a complaint of poor > convergence and it has Hitachi boards in it, all > green led`s are lit, red protect led > is not blinking, replaced both STK`s, made no > difference, I must be missing a voltage > to the IC`s but I`ve never seen this set-up > before so I`m going to need a little > help, any ideas ? tia, Larry E > Larry Eastman > American TV & Electronics > Crystal River, Fl. 34428 > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: > http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and > select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > Walter Wood United TV Service 501 Poplar St. P.O. box 602 Pulaski Tn. 38478 mailto:wwood_38478@xxxxxxxxx ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/