Change the 100 mfd cap in regulator circuit and set may fire up. Phillip R Hull STET phil245@xxxxxxxxxxxxx ----- Original Message ----- From: "Kevin" <kevintv@xxxxxxx> To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, February 11, 2003 4:52 AM Subject: [TechAssist] Zenith GA-3 chassis, dead > Hi fellow techs, > > I am not familiar with this Zenith GA-3 chassis. The set is dead and I > don't have the schematic. I haven't found any shorted transistors or > diodes. Are these the sets that had a history of bad picture tubes? It > was manufactured in August 1998. Any help would be appreciated. TIA > > Kevin Wilks > Kevin's TV & Video Repair > Penticton BC Canada > kevintv@xxxxxxx > > > **************************************************************************** * > Submit A Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.html > **************************************************************************** * > For automatic password retrieval 24 hours a day, go to: > http://www.tech-assist.org and select "Lost your Login Info?". > **************************************************************************** * > > ***************************************************************************** Submit A Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html ***************************************************************************** For automatic password retrieval 24 hours a day, go to: http://www.tech-assist.org and select "Lost your Login Info?". *****************************************************************************