ED. You will have to go to the service mode 9-8-7-6- enter. then scroll to f-mode 0, change this to f-1. Then scroll to aux and change to 01 then go back to f-1 and put it back to F-0 hit enter. That will put you in the external jack mode. I think channel 99. Good luck John ContiTV Texas >From: "Ed Gaidies" <teltek3@xxxxxxxxxxxx> >Reply-To: techassist@xxxxxxxxxxxxx >To: <techassist@xxxxxxxxxxxxx> >Subject: [TechAssist] Zenith B25A11ZF Chassis09-2108 >Date: Fri, 8 Jul 2005 12:49:28 -0400 > > Guys.. >I changed the eprom in this set. Does anyone know how to get a slot >Between Highest and lowest channel to employ the Extenal jacks at the >back. >I would presume it is done with the Service Menu 9-8-7-6 Ent. But does >anyone have the procedure after I get into Service Menu. > >Thanks. > >-Ed- > >Tel-Tek Electronics >Ontario-Canada > >teltek3@xxxxxxxxxxxx > >teltek@xxxxxxxxx > >----------------------------------------------------------------------------- >This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >Set Vacation >mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/