I don't if it applies to this model or not but some Zenith sets will power up at plug in if "factory mode " is on in service menu. HTH Bill Bill's TV Service Sulphur Springs, TX >From: "Peter oliver" <oliver_peter1@xxxxxxxxxxx> >To: techassist@xxxxxxxxxxxxx >Subject: [TechAssist] Zenith B25A10Z 9-2064-02 no turn off >Date: Sat, 21 Jun 2003 01:46:37 +0000 > >Zenith >B25A10Z >9-2064-02 > > Unit will not turn off. Turns on at plug in. pushing the power will >cut off sound but not HV or picture. Was suspicius of the micro IC 6000 but >at least part is still working ohmed out the buttons (they are on the >chassis kind of strange for a zenith, I guess LG is having its effect) Any >one run into this before or know which parts are assocated with turn on. >uploading of a schematic or a few test points would be useful as I don't >have a schematic for this one yet. (I suppose it could have gotten an >electrostaic discarge but customer isn't saying........) > > >Peter Oliver >Tucson Radio TV ***************************************************************************** CHECK OUT THE NEW CHATROOM! Just login and click on chat! http://www.tech-assist.org/secure/tip/main.htm The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/