1k SMD resistor may not be shown on schematic. HTH Bill Bill's TV Service Sulphur Springs, TX >From: "al m" <ampm@xxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Subject: [TechAssist] Zenith 9-1334 part ID >Date: Wed, 13 Aug 2003 15:48:32 -0400 >There is a surface mount something that goes from the base of Q4331 to Pin >4 of the regulator IC. Don't have the proper print for this so I'm not >sure what it is. Burned beyond recognition along with the transistor. I >know the transistor is a 121-1264-01 but this is a mystery. Thanks. >al marquardt >ampm@xxxxxxx >Al Marquardt Electronic Repair >206 W Main >Girardville Pa. 17935 >***************************************************************************** >Classifieds! Buy or Sell! >http://sell.tech-assist.org >The Tech Address Book: >http://www.tech-assist.org/secure/tip/contact.htm >Add a Repair Tip Here, or Change/Remove your Email Address: >http://www.tech-assist.org/secure/tip/main.htm >Lost Password: >http://www.tech-assist.org and select "Lost your Login Info?". >Email Archives: >//www.freelists.org/archives/techassist/ ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/
