>This is a repost of one I tried to post to TechAssist in November, but it= was rejected. I somehow got booted from the list. I finally got around to= reregistering, so I hope this one gets through! >Hello all - it's been awhile! > >I was called by a neighbor to look at his set that I had previously worked= on for another issue. According to the customer, the problem happened after= his wife started to clean the screen (sprayed cleaner on the CRT with set= powered on). She heard a snap and then the picture went to an hourglass= shape. I am not doing much servicing anymore and would like to help the guy= out if I can, but there isn't much info available in the way of tips for= this set. I'm not in a position to take the set in to work on and trying to= diagnose something like this at the customer's site is not exactly= desirable because of my present situation. So, maybe someone can at least= point me in the right direction from past similar experience, possibly? Or,= maybe someone is familiar with this set and has a service manual that they= can take a look at and give me a likely thing or two to check (I have no= manual). The only thing that I have done thus far is to go into the service= menu to make sure that some data just didn't get corrupt. Changing some of= the values for relavent parameters did not make any difference, so I= suspect a part (or maybe more than one) was damaged. > >The specs on the set are:=20 > >Model: IQ3597BT >GZ Chassis, Y Line (1996 Model Year) >9-1671-01 SMPS module >9-1678-01 Small signal module (main) >9-1298-06 Video output module >Zenith service manual #923-3300 >No SAMS available that I could locate > >Thanks to anyone who can help me out on this, > >Don Cohen >DC Electronics >Shinglehouse, PA=20 ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/