[TechAssist] Re: VCR, Go Video DDV9550 looks like bad heads
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 3 May 2004 14:41:25 -0400
Don,
Check for poor ground connections on preamp section, first. If there's a place
for a screw there, replace
the screw and try it. Flex the ribbon cable and see if symptoms improve.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: <MagLfixIt4ya@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, May 03, 2004 12:42 PM
Subject: [TechAssist] VCR, Go Video DDV9550 looks like bad heads
Hello all, Playback of known good tape (movie) on deck 2 has video noise, I
cleaned heads but no cigar, then switched heads from deck 1 to deck 2 and put
deck 2's heads in deck 1, deck 2 side still has the noise so I am ruling out
bad heads. The noise looks like stars with tails across the screen. Has anyone
seen this? Any help is appreciated.
Don@ Affordable Electronics Repair
153 Garfield Place
Brooklyn NY 11215
718-788-0384
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
