[TechAssist] Re: Toshiba PTV TP55G60, Shutdown

  • From: "albert vasquez" <albertv29@xxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Wed, 27 Mar 2002 23:17:28 +0000


Blue tube have a high falure rate.Isolate blue tube.


>From: "Bruce Youmans" <youmans@xxxxxxxx>
>Reply-To: techassist@xxxxxxxxxxxxx
>To: <techassist@xxxxxxxxxxxxx>
>Subject: [TechAssist] Toshiba PTV TP55G60, Shutdown
>Date: Wed, 27 Mar 2002 16:08:15 -0700
>
>Manuf: Toshiba
>Model: TP55G60
>Symptom: Shutdown
>
>Have followed Toshiba's troubleshooting procedure found on their Web Page.
>Low voltage power supply seems to be regulating fine in to a 100 watt light 
>bulb load only (All loads removed by removing fuse F470).
>
>Isolated convergence IC's and set still shuts down.
>Removed  high voltage lead from high voltage transformer to high voltage 
>block, still shuts down.
>With high Voltage lead from high voltage transformer connected and three 
>anode leads from high voltage block disconnected, set does not shut down.
>
>Does this sound like a bad high voltage block or have I just reduced the 
>load enough that the set no longer shuts down? Even though the low voltage 
>power supply is regulating fine, I'm wondering if I have an under voltage 
>shutdown problem under full load?
>
>Confused. TIA.
>
>Bruce
>Bruce's TV Service
>Sierra Vista, Arizona
>
>------------------------------------------
>Make your TechAssist database better!
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>




Albert vasquez
Orion services
Victoria Tx 77901
361-574-9280


_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx

------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: