C841 is 22ufd/50volts. Reason it blew again...you didn't change C822 100ufd/16volts. Also check R820....should be 68 ohms 1/4 watt...Use 1/2 watt. -Ed- Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx ----- Original Message ----- From: "Alvin Rose" <ajroseca@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, August 20, 2003 6:13 PM Subject: [TechAssist] Toshiba Model cx2950c chassis 8820 Dead > Hi Guys > > We have a toshiba CX2958c chassis 8820 which was dead > replaced c863 and c866 also c841... Replaced voltage > regulators Q801 and Q802 set came on but after a few > seconds blew the case off C841 again..Any help on this > unit would be appreciated ... also value of C841 > Alvin Rose > Radio & Tv Centre > > > > > > > **************************************************************************** * > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/
