Not sure which one, but try to ESR the caps in the video jungle, I've heard that one of the caps go bad and kills luma signal. Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "Wayne Vanaman" <Wayne@xxxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 03, 2002 4:01 PM Subject: [TechAssist] Toshiba CF27G50 no pic > > Greetings all: > > I have this Toshiba 27" CTV, model CF27G50. Sometimes it looks like there > is no lumi, at other times just nothing at all. There is also no osd. Full > deflection with retrace if the screen is turned up, audio is good. No video > through RF, video, S-video. > > I injected video at the jungle, no video output. Replaced jungle IC, no > good. Replace micro, still no OSD. Using a SAMS 3941 I tried to by-pass > the PIP module, no change. ESRed the caps in the PIP, all seemed ok. All > voltages on the jungle are close to the SAMS. > > Any ideas? > Thank you for your time and assistance. > > Wayne Vanaman > Omega Electronics > 6904 W Fairfield Dr > Penacola, Fl. 32506-3310 > > 850-456-5995 voice > 850-458-6369 fax > > Wayne@xxxxxxxxxxxxxxxxxxxxx > WWW.PensacolaTVRepair.Com > > > ----- Original Message ----- > From: <ElectronMan10@xxxxxxxxx> > To: <Techassist@xxxxxxxxxxxxx> > Sent: Wednesday, January 02, 2002 3:02 PM > Subject: [TechAssist] RCA-PTK195DC > > > > > > Problem: > > Another shop worked on this set. > > They repaired a PIP problem. > > They repaired that problem. > > They had the ant. run into a vcr and then to tv with audio/video jacks. > > Set works fine connected this way. > > Then customer decided he wanted to run signal thru tuner. > > All he could get was snow on screen. > > Just wondering if they could have connected some plug wrong or left one > > disconnected. > > Thought I would put this on list before I make a service call. > > > > Appreciate any help > > > > Electronic Service > > 1-205-698-8047 > > (Roger) > > > > ------------------------------------------ > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.