[TechAssist] Re: Toshiba CF27D60 TAC9444, multi problems
- From: al <alleathe@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 18 Jan 2002 23:12:06 -0500
did the crt come with it? al
alleathe@xxxxxxxxxxxxx
Al Leatherman
Mine Hill, NJ 07803
973-361-5796
----- Original Message -----
From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, January 18, 2002 10:42 PM
Subject: [TechAssist] Re: Toshiba CF27D60 TAC9444, multi problems
>
> Hundred bucks? Try 400 hundred bucks.
>
> Jeff
>
> Intrepid Video & Electronics
> 501 Luther Rd
> Harrisburg PA 17111 (FAX)1-413-280-0677
> www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
> mailto:jeff@xxxxxxxxxxxxxxxxxx
>
>
> -----Original Message-----
> From: techassist-bounce@xxxxxxxxxxxxx
> [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of al
> Sent: Friday, January 18, 2002 12:28 AM
> To: techassist@xxxxxxxxxxxxx
> Subject: [TechAssist] Re: Toshiba CF27D60 TAC9444, multi problems
>
>
> Jeff,
> You are doing the non exact yoke replacement shuffle.For purity I
> would
> try to turn green down,blue down, and red up, moving yoke back and forth
> until red is pure,having degaused first.
> Then straighten,lock,up yoke,do gray scale and hope for the best.
> Geometry may never be perfect.If Gary recommended it it will probably
> work,
> but non exact yokes are tricky. Good luck.
> Why didn;'t you pay the hundred bucks for the exact
> replacement?rotfl!
> al
>
> alleathe@xxxxxxxxxxxxx
> Al Leatherman
> Mine Hill, NJ 07803
> 973-361-5796
> ----- Original Message -----
> From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
> To: "Techsonline" <techassist@xxxxxxxxxxxxx>
> Sent: Friday, January 18, 2002 12:11 AM
> Subject: [TechAssist] Toshiba CF27D60 TAC9444, multi problems
>
>
> >
> > First, I had a shorted..er I mean open fuse. Replaced it to find the
> > yoke shorted. Replaced yoke with one from a Panasonic, looks like a
> > great match, (thanks Gary M)
> > After this, I had rainbow effects in the corner(worse on some scenes),
> > had to adjust the vertical and pincushion.
> > I have the vertical OK, but can not get the pincushion perfect, even
> > with p.o.t. adjustment.
> > For one, the picture is off centered, to the left too far. Also, when
> I
> > get the pincushion as straight as I can, the black bars, on each side,
> > are not very straight.
> > When I adjust the horizontal size via the p.o.t., the center section
> of
> > each side moves quicker then the top/bottom.
> > I haven't tried manual degauss, yet, but I have activated the TV's
> > degauss a few times, no luck. I thought once I get the
> pincushion/Horiz
> > problem fixed, may fix the beams.
> > Any suggestions, please?
> > Jeff
> >
> > Intrepid Video & Electronics
> > 501 Luther Rd
> > Harrisburg PA 17111 (FAX)1-413-280-0677
> > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
> > mailto:jeff@xxxxxxxxxxxxxxxxxx
> >
> >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
