Bruce, do you have + & - 30 volts at the respective NPN & PNP output collectors? What are the voltages at the base & emitter? Gary Carson City TV-VCR 2164 E Hwy 50 Carson City, NV 89701 (775)887-9089 fax (775)887-1067 ----- Original Message ----- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Monday, September 09, 2002 11:39 AM Subject: [TechAssist] Sansui A-40 Amp No Audio Output!! > > Older Amp, does any one have a" print" ,or one that is close to this unit. > Outputs are OK. Audio to the outputs OK. 30 volts at the collector of > outputs. Possible bias problem. Any help appreciated. > > thanks > Bruce > > B&T Electronics > 139 Margaret St > Sarnia Ontario > Canada > N7T 2Y3 > (519) 344-1850 > btied@xxxxxxxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/