Perry, If this is a 2002 set, suspect bad CRT. Remove yoke and CRT pcb, if set fires up, bad CRT. Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Perry Thorpe" <pkthorpe@xxxxxxxxx> To: "techassist" <techassist@xxxxxxxxxxxxx> Sent: Saturday, October 30, 2004 11:34 AM Subject: [TechAssist] Symphonic shut down I have a Symphonic Model# WF-13,IT goes in to shut down so fast I can't check it. I think it may voltage Reg. problem the short time it is on I get about 114vdc reg voltage,Horiz. output wave form looks good,reg input ckt voltage is 157vdc the goes to low 150's to high 140's vdc at power up ,I don't have a manual hate to order one its just a 19" that belonges to a friend. H.O. is a D2627 reg. is a K2662. If that helps. Any and all help on this one I would be greatly thankful. Perry Thorpe's Electronics Beattyville,KY 41311 pkthorpe@xxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/