Just thought of something when I read this. WHERE did you measure that 3.8V? At the supply is not good enough! There may be an open limiter resistor somewhere. Measure it at the display. Usually the first and last pins are it. Jim McVey McVey Alltronix 327 Broadway Newburgh N.Y. 12550 Factory authorized service for over 20 major brands. 845 561 8383 ----- Original Message ----- From: "Shaun" <satguy@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, September 24, 2004 3:30 PM Subject: [TechAssist] Re: Sony TA-AX311 no display > Filament voltage is 3.8 volts AC > > Shaun > > Advanced Electronics > 224 West Riverview Ave. > Fort Morgan, CO 80701 > ----- Original Message ----- > From: "Shaun" <satguy@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, September 24, 2004 12:10 PM > Subject: [TechAssist] Re: Sony TA-AX311 no display > > > > Funny!!! More input is everything else works. Has sound and all functions > > work just no display. I do not have the schematic so I don't know where > the > > fil volt is. Ty told me he uploaded information for it in the audio video > > area so I will look at that. > > > > Shaun > > > > Advanced Electronics > > 224 West Riverview Ave. > > Fort Morgan, CO 80701 > > ----- Original Message ----- > > From: "becyn" <becyn@xxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Friday, September 24, 2004 10:11 AM > > Subject: [TechAssist] Re: Sony TA-AX311 no display > > > > > > > To quote a movie robot..."NEED INPUT"! > > > > > > Do the other functions work? > > > Is the filiment voltage present? (usually 3vac) > > > > > > Jim McVey > > > McVey Alltronix > > > 327 Broadway > > > Newburgh N.Y. 12550 > > > > > > Factory authorized > > > service for over 20 > > > major brands. > > > 845 561 8383 > > > ----- Original Message ----- > > > From: "Shaun" <satguy@xxxxxxxxxxxxx> > > > To: "tech" <techassist@xxxxxxxxxxxxx> > > > Sent: Friday, September 24, 2004 12:05 PM > > > Subject: [TechAssist] Sony TA-AX311 no display > > > > > > > > > > This is a last ditch effort on this unit. I replaced the display tube > > and > > > > R594 that was open. I also replaced Q951 with part number B1094. It > > still > > > > has no display, everything else works on this unit and the little old > > lady > > > > loves her stereo so I am still trying to get it going. Any help? > > > > > > > > Shaun > > > > > > > > Advanced Electronics > > > > 224 West Riverview Ave. > > > > Fort Morgan, CO 80701 > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > > --- > > > > Lost Password: > > > > http://www.tech-assist.org and select "Login Problems?". > > > > Email Archives: > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > -------------------------------------------------------------------------- > > --- > > > Lost Password: > > > http://www.tech-assist.org and select "Login Problems?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/