Phil, LED detect for 4 time flashing is: ** Fault in Vertical deflection stopped ** Area you have to look at are: 1. +13V is not supplied. (A board) 2. Has entered standby state after horizontal raster. 3. IC 541 is faulty (A board) * Vertical deflection pulse is stopped. 4. Power line is shorted or power supply is stopped Good Luck Panday >From: Phil Bader <philbad@xxxxxxxxxx> >Reply-To: techassist@xxxxxxxxxxxxx >To: "techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx> >Subject: [TechAssist] Sony KV27V40 clicks only,found burnt traces >Date: Tue, 22 Oct 2002 15:40:31 -0400 > > >Found traces between the rear jacks burnt open,and another from (-) of >C212 to jumper JW240 near audio IC401.Repaired both...Plug in, relay >will click,may click every 10 seconds for a while,never any >HV,sound,etc.Finally the front stereo LED is on constant, the "stand by" >LED below blinks a series of four times, waits, then four times... >Anyone know this error code? >Phil Bader >-- >Philip Bader >Jan Phyl TV Inc. (estab. 1976) >3420 Recker Hwy. Winter Haven, Fl. 33880 >Fax (863) 299-8821 >email: philbad@xxxxxxxxxx > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ _________________________________________________________________ Choose an Internet access plan right for you -- try MSN! http://resourcecenter.msn.com/access/plans/default.asp ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/