Unsolder the 200V line from the CRT board. If the set stays on , the CRT driver Ic is bad. Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 (860)399-1861 (860)664-3535 FAX jstielau@xxxxxxxx ----- Original Message ----- From: <ERNtv@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, August 05, 2003 4:42 PM Subject: [TechAssist] Sony KV27S36 Shutting down > I have KV27S36 that is shutting down after about 5 sec, all voltages seem to > be correct and horiz drive stays until shut down. > Scott Williamson > Ernies TV, Inc > 812 N Garfield > Loveland, Co 80537 > 970-667-2424 > 970-203-9825 Fax > > > **************************************************************************** * > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ > ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/