pull the thin wire off stat if high volts comes up stat bad Andrew Rose Action TV. Holbrook ny. ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, September 20, 2004 2:38 PM Subject: [TechAssist] Sony KV2782R shutting down chassis SCC648K-A > I replaced the flyback in this set and now it's shuts down at turn on. High > voltage comes up.The B+ is 135. Could the High voltage regulator be bad? > Does anyone have a print on this set? # on high voltage stat is > 1-230-940-11. Tritronics has one for $60 but customer won't spend that much. > Anyone have a used one ? Don't see many Sony's but I think I remember > working on one of these and the stat was bad. Can you tell by pulling the > high voltage wire out of the stat? I get 24V at the protect pin from the > stat. > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/