Go to the PJE settings (these are coarse convergence settings) After pressing Display , 5 , (Volume +), then Power you can use these buttons to access the convergence: 1 and 4 change the adjustment type (ie Horz Size or Horiz Lin or ID codes etc) 2 and 5 will select blocks of settings (ie Video settings, PJE (convergence!!) or PIP settings) 4 and 6 actually change the settings. Mute then Enter buttons store the changes #3 switches from red to green to blue so you can adjust the colors #9 button enters Fine Adjustment Mode #6 button brings up various convergence grids The five menu adjustment buttons (1 in the center, 4 arrow buttons) adjust the points or the thumbstick if it has that. The center button/thumbstick when pressed will switch between moving the cursor point to point and actually adjusting the point itself. Damon Brunger Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "Gerald Gann" <alpha21century@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, February 19, 2004 2:51 PM Subject: [TechAssist] Sony KP-41T15 Service menu? > Good after noon all: Just getting back the this Sony KP-41T15 How did I get into the Service menu. I just got the STK's in and replaced them. Now need to converge it. I have the Adjustment Manual but I can't find how to get the menu to make the adjustments. > Thanks > Jerry > > Alpha 21 Electronics > > Granite City, IL 62040 > > Ph. 618-452-8620 > > Fax 618-876-5157 > www.alpha21century@xxxxxxxxxxxxx > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/