Check the socket for arc marks, did you replace it?? Did you wear gloves installing the lamp? Did you check with the manufacturer and see if the socket needed "dressing" before installing?? You need to check these out. Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "drcvr" <drvcr@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 05, 2002 4:01 PM Subject: [TechAssist] Sharp projection XV100 > Hello Techs! > Please help us, after we changed $450.00 lamp on this unit it doesn't work. After 15 times tried to press power and the lamp turn on, work for 1/2 hour then quit. We don't have print for this unit. We did open and check power supply of the lamp, relay does kick in and the lamp try to turn on 1 second and relay kick out, it try to turn on 3 times and "LAMP SERVICE" warning light come up. We did check all caps inside P/S could not find any bad one. > > I appreciate any input on the above problem > THANKYOU! > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.