Thanks Jorge, will also try this if set brought in to shop. Dave Routson Dave's TV Cleburne, Tx 76033 817-641-8465 ----- Original Message ----- From: "Jorge Miret" <jmiret@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, March 08, 2002 2:25 PM Subject: [TechAssist] Re: Sears LXI 564-42905950 locked in demo > > Hello guys ! > Dave I have the procedure for the 564-42905450 I am not sure if it is the > same chassis but anyway here it goes and give it a try. > 1) Turn on the TV. > 2) Look for TP810 (should be in front of IC 501) > 3) Momentarely (forgive my spelling) short TP 810 to ground. > 4) After this,You should see a code about the midle of the screen. > 5) Compare this code with the one written in the IF shield (they should > match). > 6) If the codes are the same,just press power on the TV and ready to go.Next > time You turn it on should be ok. > 7) If in the above step,the codes are diferent,just use the remote control > to enter the one on the IF shield and after that,just press power on the TV > and ready. > I hope this helps. > Jorge. > ----- Original Message ----- > From: Dave Routson <davestv@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, March 08, 2002 3:05 PM > Subject: [TechAssist] Sears LXI 564-42905950 locked in demo > > > > > > Wondering if anyone has the procedure > > for getting this tv out of the demo mode. > > Have not seen set, customer called and > > I looked up schematic but it does not > > give this information, although it does > > tell how to reset the eeprom code if > > replaced. This procedure does require > > a tech to fulfill. Thought there might be > > a way to stop demo with controls or remote although the customer doesn't > > have original remote either. Any help or > > advice appreciated. > > Thanks > > Dave Routson > > Dave's TV > > Cleburne, Tx 76033 > > 817-641-8465 > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.