[TechAssist] Re: Sanyo Regulatiion Problem
- From: Don Finklea <free115@xxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 5 Mar 2002 18:45:06 -0800 (PST)
hey gary; check the 47 ohm 5 watt and the 4.7 160v
"W. Blakey" <wblakey@xxxxxxxxxxxxxxxx> wrote:
There is a large square resistor (15 or 20 watts) that bypasses some of the
current around the regulator ic and this could be open. I carries some of
the current as well as the ic.
Wilf Blakey/Blakey TV,Kirkland Lake,Ont
wblakey@xxxxxxxxxxxxxxxx
----- Original Message -----
From:
To:
Sent: March 5, 2002 1:49 PM
Subject: [TechAssist] Sanyo Regulatiion Problem
>
>
> We have a Sanyo AVM-2758 (chassis G5G-2758) Set came in dead. Hot and
> regulator was shorted, replaced 2SD-1878 and STR-30130. Now picture is
small
> and taring,. The most voltage I can get out of is 114v-124v. I have
changed
> the STR-30130
> three times.
>
> Can anyone help
>
> Thanks
> Will
> Soundview Electrobics
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
---------------------------------
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
