[TechAssist] Re: Sanyo 27" AVM-2747U Chassis-G5J-2747U1

  • From: javiles929@xxxxxxx
  • To: techassist@xxxxxxxxxxxxx
  • Date: Fri, 15 Feb 2002 22:07:05 EST

In a message dated 2/15/02 3:30:28 PM Pacific Standard Time, javiles929 
writes:


> Subj: Re: [TechAssist] Sanyo 27" AVM-2747U Chassis-G5J-2747U1
> Date: 2/15/02 3:30:28 PM Pacific Standard Time
> From: <A HREF="mailto:javiles929";>javiles929@xxxxxxx</A>
> To: <A HREF="mailto:techassist@xxxxxxxxxxxxx";>techassist@xxxxxxxxxxxxx</A>
> 
> 
> 
> In a message dated 2/15/02 12:47:46 PM Pacific Standard Time, 
> teltek@xxxxxxxxxxx writes:
> 
> 
> 
> >> Subj: [TechAssist] Sanyo 27" AVM-2747U Chassis-G5J-2747U1
>> Date: 2/15/02 12:47:46 PM Pacific Standard Time
>> From:    teltek@xxxxxxxxxxx (Tel-Tek Electronics)
>> Sender:    techassist-bounce@xxxxxxxxxxxxx
>> Reply-to: <A 
>> HREF="mailto:techassist@xxxxxxxxxxxxx";>techassist@xxxxxxxxxxxxx</A>
>> To:    techassist@xxxxxxxxxxxxx (AAAA TECH-ASSIST)
>> 
>> Ed i`m working on a similar model AVM 2753 set came in with only the relay 
>> clicking, check Q400 D1879 and was leaky. Also check for a lot of cold 
>> solder around that area and R008 and R009 220 ohms 10W wire wound resistor 
>> for cracks. I`m still working on the set but at least set goes on. Hope 
>> this help.
>> 
>> 
>> Aviles Computer & Tv Repair
>> Bronx, NY 10452
>> 
> 
> 
> 
> 
> 
> 
> 
> 
> >> 
>> 
>> Would onyone have a partial on the Power Supply on the above set. Main and
>> standby.
>> I have one here that had a Power Surge, set wants to start, but relay 
>> clicks
>> on and 4 seconds later clicks off.
>> Then you can't turn it on again, unless you pull the plug.
>> I don't believe HV ever comes up, but tries.
>> 
>> -Ed-
>> 
>> teltek@xxxxxxxxxxx
>> 
> 




------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: