[TechAssist] Re: Samsung Projection TV - STP-521J

  • From: "David Lessard" <mrfixit@xxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Sun, 12 Jan 2003 15:47:20 -0500

OK, I found a part number #AA95-90020C, Premier Parts wants $260.78 for it,
are they nuts...Has anyone had success in reworking this module on a
component level? Does anyone have a service manual or partial schematic for
this convergance module? Thanks.

David.

-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of David Lessard
Sent: Sunday, January 12, 2003 2:15 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Samsung Projection TV - STP-521J



I need a part number for the convergance module in this TV please. Chassis#
APT51B. Any information on accessing setup would be appreciated. Thanks.

David.

-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of David Lessard
Sent: Sunday, January 12, 2003 1:27 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Samsung Projection TV - STP-521J



Here's the right model number, STP-521J, is this problem a common problem
with this unit. Thanks.

-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of David Lessard
Sent: Sunday, January 12, 2003 12:51 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Samsung Projection TV - STT521J



I believe this may not be a valid model number, Google turns up nothing. I
will have to visit the TV myself, you think a customer could provide you
with something as simple as a model number over the phone, then again, I
could be wrong.

David

-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of David Lessard
Sent: Sunday, January 12, 2003 11:02 AM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Samsung Projection TV - STT521J



Gentlemen, Sorry, I don't know the chassis number. Symptoms: colors
seperated, distorted colors, shadows. Bad convergance board? All thoughts
appreciated. Thank-you.

"Share what you know, Learn what you don't"

David Lessard
Alexandria Electronics
50 Harrison Street
Alexandria, Ontario
K0C-1A0
mrfixit@xxxxxxxxxxx

------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.techassist.net/forms/change.html

Other related posts: