[TechAssist] SHARP 27F-S200, major vertical problem
- From: "becyn" <becyn@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 30 Oct 2003 13:23:23 -0500
Hello all,
We got this set in with a vertical collapse (line).
The vertical out IC was was shorted, which also took out the supply diode and
it's limiting resistor.
The 100uf charge pump cap was also changed for good measure.
Here's the problem...
Now it has 2/3 vertical raster with a bight white line in the middle!!!
Any ideas or personal experieces would be appreciated.
Jim McVey
McVey Alltronix
327 Broadway
Newburgh Ny 12550
ph: 845 561 8383
fx: 845 561 9017
Consumer electronics &
computer service.
Factory authorized for
over twenty brands.
*****************************************************************************
Classifieds! Buy or Sell!
http://sell.tech-assist.org
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.htm
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.htm
Lost Password:
http://www.tech-assist.org and select "Lost your Login Info?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
