Make that the RIGHT hand side.... sorry Dave ----- Original Message ----- From: "D. Willoughby" <the_tv_guy@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, September 20, 2001 9:30 AM Subject: [TechAssist] Re: RCA ticking sound > > These sets and the 140 chasis were notorious for bad connects. The place > that normally causes the described problem is the small substrate diode > board on the left hand side of the main board just behind the flyback. It > sits just behind two big caps. Pull board and resolder all connections. > Check the dioides on the board and the two big caps in front of it. > > Hope that helps. > > ----- Original Message ----- > From: "john lyle" <johnlyle@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, September 19, 2001 2:00 PM > Subject: [TechAssist] RCA ticking sound > > > > > > Still working on RCA model grm814h chassis ctc-130a/b/c, set doesn't > > start up just ticking sound. Any suggestions, don't have schematics, any > > help! > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.