THANK YOU JIM. But the pinout of the Tda 8361A is unavailable at the Philips site.This ic is a real jungle in every way !. Alberto --------------------------- -- - Jim Myers <jr.myers@xxxxxxxxxxx> ha scritto: > > Alberto, use GOOGLE search and type in TDA8361A, > this will take you to a > CHIP DIRECTORY page where you will see the > difference between the 8361 and > the 8361A. Looks like you should be able to use the > 8361A version as a sub > for the 8361 but not the other way. > It is the same basic chip so the pinout would be the > same so your osc should > run just fine and you probably have other problems. > Jim Myers > jr.myers@xxxxxxxxxxx > ----- Original Message ----- > From: "Quenton Kilgore" <kilgorq@xxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, September 17, 2001 11:02 PM > Subject: [TechAssist] Re: TDA 8361=TDA8361A? > > > > > > I have tried this several times and most of the > time you have to have the > > original > > -----Original Message----- > > From: techassist-bounce@xxxxxxxxxxxxx > > [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf > Of KAMAL ADLI > > Sent: Monday, September 17, 2001 2:49 PM > > To: techassist@xxxxxxxxxxxxx > > Subject: [TechAssist] Re: TDA 8361=TDA8361A? > > > > > > if the equipment or set you repair is design by > phillips group,it > > recommended to used the original part no > > > > > > >From: Comune Marino <ragmandati@xxxxxxxx> > > >Reply-To: techassist@xxxxxxxxxxxxx > > >To: techassist@xxxxxxxxxxxxx > > >Subject: [TechAssist] TDA 8361=TDA8361A? > > >Date: Mon, 17 Sep 2001 12:16:46 +0200 (CEST) > > > > > > > > >Hi friends. > > >Can i substitude a TDA 8361 with a TDA 8361A ? > > > > > >The TDA 8361 was lifeless (no quartz > oscillation,no > > >line drive,dead tv set) I swapped with a readily > > >available TDA 8361A ,now i get a dirty > oscillation of > > >the quartz but not line drive. > > > A L B E R T O > > > > > > >______________________________________________________________________ > > >Do You Yahoo!? > > >Il tuo indirizzo gratis e per sempre @yahoo.it su > http://mail.yahoo.it > > >Help make your TechAssist online repair tips > > >database better! Submit your fixes here: > > >http://www.circuitwork.com/techassist/tip/#tips > > >To unsubscribe write to: > > >techassist-request@xxxxxxxxxxxxx > > >with unsubscribe in the subject line. > > > > > > > _________________________________________________________________ > > Get your FREE download of MSN Explorer at > http://explorer.msn.com/intl.asp > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. ______________________________________________________________________ Do You Yahoo!? Il tuo indirizzo gratis e per sempre @yahoo.it su http://mail.yahoo.it Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.