[TechAssist] Re: RCA VCR VR634HF
- From: "Ed Gaidies" <teltek3@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 17 Dec 2003 13:16:53 -0500
Thanks Paul...I just posted the fix.
-Ed-
Ed Gaidies
Tel-Tek Electronics.
Ontario-Canada
teltek3@xxxxxxxxxxxx
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Paul
Sent: December 17, 2003 1:08 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: RCA VCR VR634HF
Hi Ed, I would be looking at the tape end sensors. Maybe a solder crack.
What you described is what that unit does when it reaches the end of a
tape. Yours is not rewinding be for it shuts off, but that may not have
any bearing on the problem. Paul
Tel-Tek Electronics <teltek3@xxxxxxxxxxxx> wrote:OK...forget the Mode
Switch, since it was not the problem. I had this
one running in the shop today. Ran OK. Put it back on my system in the
house. Same thing.
Like you...I will have another look at it when time allows. Will post.
-Ed-
Ed Gaidies
Tel-Tek Electronics
Ontario-Canada
teltek3@xxxxxxxxxxxx
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Fernand Goguen
Sent: Tuesday, December 16, 2003 9:51 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: RCA VCR VR634HF
I have the same VCR and I have the same problem. As soon as I have some
spare time, I'm going to change the caps in the p/s. If you find
anything in the meantime please let me know.
FERNAND GOGUEN
GOGUEN TV SERVICE
2042 ROUTE 535
COCAGNE N.B.
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Ed Gaidies
Sent: December 16, 2003 12:23 PM
To: TechAssist
Subject: [TechAssist] RCA VCR VR634HF
Have an intermittent problem with this unit. (My own unit). Periodically
this unit will go crazy. You insert a tape...Push Play..will play a
couple of seconds, then display says.."Bye" and shuts off. When you
re-apply power tape ejects. Seems to be OK on FF and Rew. I have
disassembled the mode switch, cleaned and lubed it. Worked OK for a
couple of sessions, then goes back to the same problem. This unit has
the Commercial Skip on it. Today I brought the unit into the shop, and
has been running for 3 hours, no problem. Any ideas?
-Ed-
Ed Gaidies
Tel-Tek Electronics.
Ontario-Canada
teltek3@xxxxxxxxxxxx
************************************************************************
*****
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
************************************************************************
*****
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
************************************************************************
*****
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Paul ,B
Central TV&Video
Grover Beach Ca.
************************************************************************
*****
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
*****************************************************************************
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
