Fuzz, From Tech Repair CD: RCA\TX826NC\NO TUNER FUNCTION\\\\REPLACE TP14* DP18\\\\\\\\ Jeff@xxxxxxxxxxxxxxxxxx FAX 717-564-4952 Jeff Dougherty Intrepid Video & Electronics Be careful of your thoughts. 501 Luther Rd They may become your words Harrisburg, PA 17111 any moment. 717-909-8844 VCR tips, electronics info & general interest. www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com www.9-11-2001tragedy.com *********************************************************************** ----- Original Message ----- From: "fantaj" <fantaj@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, December 08, 2002 12:57 AM Subject: [TechAssist] RCA TX-826 TC or TB intermittent NEED HELP on RCA TX-826 I have a lot of problems with AFT, and no autoprogramming, what it does now, when cold, when turned on, is nothing but squiggly lines on all the VHF channels, except channel 9 which is totally out, black screen, sound is gone too, looks like the channels are way out of tune, however the UHF channels are just fine, after a minute or so, suddenly everything pops in and its OK from there on. I spend a lot of time on this set, I was also told it was the AFT coil, which I got brand new, and it did not help, Did the RCA alignment procedure. Anyway, I have checked just about everything, two things left are now the micro and the tuner, I suspect more the tuner. TX826TC, or could TB Fantaj TV Belle Vernon, Pa. 15012 ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html