[TechAssist] Re: RCA TV/VCR COMBO T19060GY _ DOESN'T POWER UP
- From: "J Silverman" <greentron@xxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 30 Mar 2002 15:06:55 -0500
On that model, the power light will flash six times if it is in lock and you
attempt to turn the power on.
Jerry Silverman
Greentron Inc
4 Newland Ave
Greenville SC 29609
864 232 3889
Fax 271 2080
mailto:greentron@xxxxxxx
----- Original Message -----
From: "Ray Gustafson WB0HHM" <rgustafson@xxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, March 30, 2002 6:29 AM
Subject: [TechAssist] Re: RCA TV/VCR COMBO T19060GY _ DOESN'T POWER UP
>
> Hi
> Did you take the remote and hold down power button
> for more then 7 sec to make sure it isn't in partenal
> lock. I have had a lot of these and learned the hard way.
>
> Ray
> Karls TV Sioux Falls SD
> ----- Original Message -----
> From: <WGordonG@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, March 29, 2002 5:42 PM
> Subject: [TechAssist] RCA TV/VCR COMBO T19060GY _ DOESN'T POWER UP
>
>
> >
> >
> >
> > PRESS THE POWER SWITCH AND THE SWITCH LED LITES UP, BUT THE RELAY
> DOESN'T
> > ACTIVATE AND THE SET DOESN'T POWER UP. ALL VOLTAGES AROUND THE SMPS ARE
> OK,
> > WITH THE EXCEPTION THE 13 VOLTS IS MISSING I THINK IS NECESSARY TO
OPERATE
> > THE RELAY.
> >
> > ANYTHING THAT I AM MISSING OR TO LOOK FOR .
> >
> > Wm GORDON @
> > GORDON'S ELECTRONICS
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
> >
>
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
