[TechAssist] Re: RCA Splitter part number
- From: "mark brock" <brock@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 17 Jan 2002 13:01:12 -0800
Ok; I got it, I put in a 205064 and she's up and runnin, thanks for all
the input If it wouldn't have had the omega ( assuming thats the non-oem
mfg.?) I'd of been ok, of course a print would help also. This set was
bought new and should have had original rca splitter in it. but didn't ?
Thanks again for all .... I mean all the help
brock
Brock Electronics
R.R.4 box 237
Independence Ks. 67301
316-331-0235
fax 331-7191
brock@xxxxxxx
mailto:brock@xxxxxxx
-----Original Message-----
From: Bill McFarland <billmcfarland@xxxxxxxxxxxxxx>
To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
Date: Thursday, January 17, 2002 8:37 AM
Subject: [TechAssist] Re: RCA Splitter part number
>
>Just a little hint about these HV splitter from MAT.
>
>Yes, they are cheaper.
>Yes, they work just fine.
>
>Just be careful with them. The plastic they are made of is not nearly as
>strong as the original.
>(FYI: I have been doing this a long time. So I am sure that I was just not
>be to rough. If it had been my son or helper doing this I would have
>suspected differently.)
>
>Example: (This was the first one I did)
>The little plastic tab that holds the circuit board on the top of the
>splitter broke just looking at it.
>The plastic tabs that holds the collates in the holes for the HV wires
three
>of them broke inserting the collate.
>The mounting holes cracked when I tightened the screws down.
>
>I was able to save the splitter with glue, silicone, bubble gum, bailing
>wire, and a prayer.
>
>Subsequent splitters have been fine now I know to handle them with kid
>gloves.
>
>So just be careful or the money you save on the splitter will get eaten up
>by the time it takes to make it work.
>
>Good luck, God Bless
>Bill McFarland
>DMC Electronics
>Salt Lake City, Utah
>
>----- Original Message -----
>From: Jack <lightwizard_2000@xxxxxxxxx>
>To: <techassist@xxxxxxxxxxxxx>
>Sent: Wednesday, January 16, 2002 9:46 PM
>Subject: [TechAssist] Re: RCA Splitter part number
>
>
>>
>> CTC169 is the same chassis.
>> You can get these blocks cheaper from MAT Electronics.
>>
>>
>>
>> --- mark brock <brock@xxxxxxx> wrote:
>> >
>> > ctc196pt chassis, customer said it was a ptk169pta
>> > when I called before the
>> > long service call, dont know the model of the set
>> > as its still at the home
>> > and brought in the light box. splitter is burnt
>> > numbers on side are OMEGA
>> > 40431-090, any help on the rca number ?
>> > thanks
>> > brock
>> > Brock Electronics
>> > R.R.4 box 237
>> > Independence Ks. 67301
>> > 316-331-0235
>> > fax 331-7191
>> > brock@xxxxxxx
>> > mailto:brock@xxxxxxx
>> >
>> >
>> > ------------------------------------------
>> > Make your TechAssist database better!
>> > Submit Repair Tips here:
>> > http://www.tech-assist.org/secure/tip/
>> > ------------------------------------------
>> > To UNSUBSCRIBE your email address, click here:
>> >
>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>> > Or send a BLANK email with unsubscribe in the
>> > SUBJECT field to the address above.
>> >
>>
>>
>> =====
>> Electronic Wizards
>> 535 North Woodlawn
>> Suite 350
>> Wichita, Kansas 67208
>> 316-686-8324
>> 316-686-4815 fax
>>
>> __________________________________________________
>> Do You Yahoo!?
>> Send FREE video emails in Yahoo! Mail!
>> http://promo.yahoo.com/videomail/
>> ------------------------------------------
>> Make your TechAssist database better!
>> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>> ------------------------------------------
>> To UNSUBSCRIBE your email address, click here:
>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>> Or send a BLANK email with unsubscribe in the
>> SUBJECT field to the address above.
>>
>
>------------------------------------------
>Make your TechAssist database better!
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
