Usually on this chassis reinitializing is all that is needed. I would try it again or change the eeprom. Are all of the other osd displays working, only the mute does not come up? If so definitely change the eeprom. Jason Mouton's Electronics ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, September 21, 2003 7:56 PM Subject: [TechAssist] RCA PTV P52771AT CTC178L no sound > This set has no sound need print. The mute OSD doesn't come up on screen when pushed. Reinitialized EPROM. Need print to start with power supply and work back. Thanks. YES speakers are turned on. > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > **************************************************************************** * > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/