Align the aft coil L12302 disconnect ant. connection using remote select channel 4 or 5 (whatever used in your area) wait a couple seconds then reattach ant. and align coil L12302 for +3.8 volts at pin 12 of jungle IC Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc Dallas, TX ----- Original Message ----- From: "S. Pasher" <spasher@xxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, April 01, 2004 10:31 AM Subject: [TechAssist] RCA PTK195W1T Model # P61950 > Got a PTK195 that sometimes doesn't tune in the channels for 1 to 5 mins. > Most of the channels are good, usually its the channels between 18 and 25 > that do it. When the channels come in after the delay the are alright > One of the things I was going to change was the EEPROM , but not having any > info ( no service manual) I don't know if it can be changed without a > chipper checker. As I don't have one I am wondering if the pre-programmed > ones are available. > Any help one this one would be appreciated as this is the first 195 I've > seen. > > Buck Pasher > Buck's TV > Gander Newfoundland > Canada > 709-256-7738 (Fax & Phone) > > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/