On the 2 I had C19706 measured around 600-800 ohms removed scraped board and replaced caps fixed. Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc Dallas, TX ----- Original Message ----- From: "Kevin" <kevintv@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, October 20, 2003 1:17 PM Subject: [TechAssist] Re: RCA PTK195M26A, P46921, convergence problems > I replaced all but CR19713, but it tested good out of circuit. I was > going to replace it anyways, but my supplier only had 1 ECG587. I will > find a used one and see if that fixes my problem. How can I test C19706 > for leakiness? Thanks. > > Kevin Wilks > Kevin's TV & Video Repair > Penticton BC Canada > kevintv@xxxxxxx > > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of > tvservice@xxxxxxxxxxxxx > Sent: Monday, October 20, 2003 7:18 AM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: RCA PTK195M26A, P46921, convergence problems > > Did you replace all these listed parts? > Q19701 246967 / P4NB50FP > Q19702 147665 / NTE159 > Q19703 232218 > Q19704 229220 / NTE123AP / 2N3904 / BC547 > U19701 231525 / NTE999 > CR19701 198589 / NTE519 > R19703 241313 / 15 ohm 1/2 w > CR19710 234048 / MUR115 / NTE587 > CR19713 234048 / MUR115 / NTE587 > F14201 175425 / GMA 5A > > if so and still having problems but not blowing line fuse check C19706 > leaky > replace with 239176 820pf surface mount cap > Robert > tvservice@xxxxxxxxxxxxx > H & H Electronics Inc > Dallas, TX > > ----- Original Message ----- > From: "Kevin" <kevintv@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Sunday, October 19, 2003 7:35 PM > Subject: [TechAssist] Re: RCA PTK195M26A, P46921, convergence problems > > > > I checked the voltages and the convergence power supply is not > working! > > I changed 7 parts but must have missed one. The -45V, -15V are > missing; > > and the 45v line is 25v and drops as I measure it, and the 23v and 15v > > are missing. Do you have a schematic for the new improved convergence > > P/S? > > This P/S has the fet and 4 small driver transistors. Thanks. > > > > Kevin Wilks > > Kevin's TV & Video Repair > > Penticton BC Canada > > kevintv@xxxxxxx > > > > > > -----Original Message----- > > From: techassist-bounce@xxxxxxxxxxxxx > > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Wayne Vanaman > > Sent: Sunday, October 19, 2003 12:53 PM > > To: techassist@xxxxxxxxxxxxx > > Subject: [TechAssist] Re: RCA PTK195M26A, P46921, convergence problems > > > > If there are no convergence options on the users menu it means that > the > > convergence IC is not talking to the main IC. This would happen on > plug > > in. > > The thing thinks it is a direct view tv. > > > > What you need to do is > > a. check for +- 15 and 40something on the diodes of the secondary, so > > that > > you know the power supply is working. > > 2. ensure that the convergence ic has power supply, the coils I > > mentioned. > > III.ensure a "line of communication" between the convergence IC and > the > > main > > ic. That is, see if there is data activity at the convergence IC at > > plug > > in. > > > > > > Wayne Vanaman > > Omega Electronics > > 6904 W Fairfield Dr > > Pensacola, Fl. 32506-3310 > > > > Wayne@xxxxxxxxxxxxxxxxxxxxx > > WWW.PensacolaTVRepair.Com > > > > 850-456-5995 voice > > 850-458-6369 fax > > > > > > ----- Original Message ----- > > From: "Kevin" <kevintv@xxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Sunday, October 19, 2003 2:31 PM > > Subject: [TechAssist] Re: RCA PTK195M26A, P46921, convergence problems > > > > > > > Hi Wayne, > > > > > > No, I could not find the convergence adjust menu options in the > users' > > > menu. I also noticed that the heat sinks on the convergence board > are > > > remaining cold when I leave the set on for 30 minutes. I am going > to > > > measure the voltages coming out of the convergence P/S as a start. > > Off > > > hand do you know what they are supposed to be? Thanks. > > > > > > Kevin Wilks > > > Kevin's TV & Video Repair > > > Penticton BC Canada > > > kevintv@xxxxxxx > > > > > > > > > -----Original Message----- > > > From: techassist-bounce@xxxxxxxxxxxxx > > > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Wayne Vanaman > > > Sent: Sunday, October 19, 2003 4:16 AM > > > To: techassist@xxxxxxxxxxxxx > > > Subject: [TechAssist] Re: RCA PTK195M26A, P46921, convergence > problems > > > > > > Hi Kevin. > > > > > > Pull the shields off of the control area on the convergence board > and > > > see if > > > that takes care of it. (Don';t leave them off, of course.) There > was > > > an > > > "issue" with shield covers touch traces/parts causing problems. > > > > > > Of course there could be a defective power transistor, but I have > seen > > a > > > few > > > with open filter coils, again, under the shield covers. Do you get > > the > > > convergence adjust ment options ("Adjust Projection TV") in the > users > > > menu? > > > > > > Wayne Vanaman > > > Omega Electronics > > > 6904 W Fairfield Dr > > > Pensacola, Fl. 32506-3310 > > > > > > Wayne@xxxxxxxxxxxxxxxxxxxxx > > > WWW.PensacolaTVRepair.Com > > > > > > 850-456-5995 voice > > > 850-458-6369 fax > > > > > > > > > ----- Original Message ----- > > > From: "Kevin" <kevintv@xxxxxxx> > > > To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx> > > > Sent: Saturday, October 18, 2003 9:02 PM > > > Subject: [TechAssist] RCA PTK195M26A, P46921, convergence problems > > > > > > > > > > Original problem was open 5amp main fuse caused by bad convergence > > P/S > > > > board. Replaced numerous parts in P/S (the newer design without > the > > > > STK's) and now the set fires up but the convergence is way off. > Top > > > and > > > > bottom is pin cushioned for each gun. Any help would be > appreciated > > > as > > > > the customer is moving on Tuesday morning and he lives 30 miles > > away. > > > > TIA. > > > > > > > > Kevin Wilks > > > > Kevin's TV & Video Repair > > > > Penticton BC Canada > > > > kevintv@xxxxxxx > > > > > > > > > > > > > > > > > > > > > > ************************************************************************ > > > **** > > > * > > > > Classifieds! Buy or Sell! > > > > http://sell.tech-assist.org > > > > The Tech Address Book: > > > > http://www.tech-assist.org/secure/tip/contact.htm > > > > Add a Repair Tip Here, or Change/Remove your Email Address: > > > > http://www.tech-assist.org/secure/tip/main.htm > > > > Lost Password: > > > > http://www.tech-assist.org and select "Lost your Login Info?". > > > > Email Archives: > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > > > > > > > ************************************************************************ > > > ***** > > > Classifieds! Buy or Sell! > > > http://sell.tech-assist.org > > > The Tech Address Book: > > > http://www.tech-assist.org/secure/tip/contact.htm > > > Add a Repair Tip Here, or Change/Remove your Email Address: > > > http://www.tech-assist.org/secure/tip/main.htm > > > Lost Password: > > > http://www.tech-assist.org and select "Lost your Login Info?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > > > > > > ************************************************************************ > > **** > > * > > > Classifieds! Buy or Sell! > > > http://sell.tech-assist.org > > > The Tech Address Book: > > > http://www.tech-assist.org/secure/tip/contact.htm > > > Add a Repair Tip Here, or Change/Remove your Email Address: > > > http://www.tech-assist.org/secure/tip/main.htm > > > Lost Password: > > > http://www.tech-assist.org and select "Lost your Login Info?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > ************************************************************************ > > ***** > > Classifieds! Buy or Sell! > > http://sell.tech-assist.org > > The Tech Address Book: > > http://www.tech-assist.org/secure/tip/contact.htm > > Add a Repair Tip Here, or Change/Remove your Email Address: > > http://www.tech-assist.org/secure/tip/main.htm > > Lost Password: > > http://www.tech-assist.org and select "Lost your Login Info?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > ************************************************************************ > **** > * > > Classifieds! Buy or Sell! > > http://sell.tech-assist.org > > The Tech Address Book: > > http://www.tech-assist.org/secure/tip/contact.htm > > Add a Repair Tip Here, or Change/Remove your Email Address: > > http://www.tech-assist.org/secure/tip/main.htm > > Lost Password: > > http://www.tech-assist.org and select "Lost your Login Info?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > ************************************************************************ > ***** > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ > > **************************************************************************** * > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/