Hello all This chassis has a good power supply, 140 volts at hot.It won't come on. Have traced pulse from IR receiver to micro-ok.Have a pulse at pin 5 on eprom with 1.5 volts dc there, and can see a very weak pulse on pin 6 of eprom with 2.3 volts there. I scraped the glue from under caps 503 & 581 on the convergence board, thinking that might be holding the data line down.There is only .52 volts at the black wire at P19503, and .48 volts on the white wire there. I don't have a schematic and my distributor will take 2 weeks to get one.Does anyone have any tips on this trouble they can share? Thanks! Richard La Placa Continental TV 312a Park Row Chestertown, Md. fax&phone-410-778-1113 website: http://www.continentaltv.homestead.com/ continentaltv@xxxxxxxxxxx ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/