[TechAssist] Re: RCA DTV307 chassis HEADS UP!!!!
- From: walter wood <wwood_38478@xxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 19 Nov 2002 07:14:01 -0800 (PST)
Damon, sorry for the delay.
Yes, my CC has been upgraded.
I think the problem was with the software that
Thomson sent to reprogran the ATC311's.
I'll do more checking and get back to you.
I finally(yesterday) had to re format the hard
drive in my 'puter to get rid of it.
Fortunately, I had the source disks and backup's.
Taking a while to get back up though.
Later
Thanks for the response.
Walter--- Damon <DAMON101@xxxxxxxxxxxxxx> wrote:
>
> Hey Walter,
>
> Have you upgraded your Chipper Checker with
> CC-Kit-2 ??
> What problem did you have with it??
>
> Damon Brunger
> damon101@xxxxxxxxxxxxxx
> Telrad Electronic Services
> Ft Wayne, IN 46815
>
> ----- Original Message -----
> From: "walter wood" <wwood_38478@xxxxxxxxx>
> To: "Tech Assist" <techassist@xxxxxxxxxxxxx>
> Sent: Friday, November 15, 2002 4:28 PM
> Subject: [TechAssist] RCA DTV307 chassis HEADS
> UP!!!!
>
>
> >
> > I hope this saves someone some time.
> > I had to replace a yoke on this set, and the
> > convergence needed minor adjustment.
> > I tried to adjust it manually,using the
> procedure
> > in the ESI manual(CD-ROM) for this chassis.
> > I was not successful.
> > I then tried to use Chipper Check.
> > That doesn't work either, and Sencore's guy
> seems
> > nice enough, and tried, but has no real
> knowledge
> > on the thing.
> > And Sencore's application engineer, has yet to
> > return my calls.
> > So, back to trying to converge manually.
> > The HEADS UP is that on pages 3-12 and 3-13 of
> the
> > alignment procedure is WRONG!!!!!
> > In order to exit the main convergence menu,
> V80,
> > one has to press INFO on the remote.
> > The manual says to press ON/OFF or Power.
> > And the adjustments are not saved, and all yuor
> > work in in vain.
> > I don't understand why it took 5 calls to tech
> line
> > before someone could tell me this.
> > HTH
> > Walter
> >
> > =====
> > Walter Wood
> > Future Tech Home Center
> > 2786 Hwy. 43 N.
> > Lawrenceburg Tn. 38464
> > 931-829-3337
> > Fax 931-829-4044
> > mailto:wwood_38478@xxxxxxxxx
> >
> >
>
__________________________________________________
> > Do you Yahoo!?
> > Yahoo! Web Hosting - Let the expert host your
> site
> > http://webhosting.yahoo.com
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
> >
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
=====
Walter Wood
Future Tech Home Center
2786 Hwy. 43 N.
Lawrenceburg Tn. 38464
931-829-3337
Fax 931-829-4044
mailto:wwood_38478@xxxxxxxxx
__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - Let the expert host your site
http://webhosting.yahoo.com
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
