Remove Hv Splitter from front of unit and look for crack in epoxy on bottom. common on these, replace splitter. Phillip R Hull STET phil245@xxxxxxxxxxxxx FAX 517--569-3075 Professional Technicians only ----- Original Message ----- From: "ben daniels" <benstv74820@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, December 01, 2003 2:51 PM Subject: [TechAssist] RCA D40W135D (ATC221) chassis Dead won't turn on > This is the first one of these for us. This is new out > of box. At first we had the power lite to flash on and > off. We called rca tech and was told to change small > signal board which comes with system control and more > stuff, no luck only progress was that the power lite > nolonger flashes. We have all the standby volts but > there is no horzi. dr. When you plug the set in you > can hear the switch mode circuit try to start 3 times, > wait and you can press power button and get same > thing. This is a major ordeal to try to get to > anything to check was wondering if anyone might of had > this before. Next step is back to RCA tech if no help. > Thanks Ben > > ===== > Randy Daniels > Ben's TV Repair > 1703 No. Brdwy. > Ada, Okla. 74820 > > __________________________________ > Do you Yahoo!? > Free Pop-Up Blocker - Get it now > http://companion.yahoo.com/ > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/