[TechAssist] Re: RCA CTC175A
- From: "Ed Gaidies" <teltek3@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 25 Feb 2004 15:20:05 -0500
5.3 Volts on CRT...7.2 Volts off.
One spark Gap to Ground.
Just used the CRT checker, cleared the shorts, seems to be running cool
now.
-Ed-
Ed Gaidies
Tel-Tek Electronics.
Ontario-Canada
teltek3@xxxxxxxxxxxx
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of peggs
Sent: February 25, 2004 4:55 PM
To: techassist@xxxxxxxxxxxxx; techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: RCA CTC175A
what's the filament voltage ???
any other components-to-ground ???
remove CRT PCB from CRT,same voltage,still hot ???
G2 voltage ???
Peggs
11:21 AM 2/25/04, Ed Gaidies wrote:
>Had a CTC175A with no Filament Supply. Found Supply resistor R4703
open.
>(3.3/3Watt).
>Replaced with same value. But new resistor is running pretty hot. (Too
>Hot)Filaments are back on, but I don't believe the resistor should run
>that hot.
>Anyone been there?
>
>TIA
>
>-Ed-
>
>Ed Gaidies
>Tel-Tek Electronics.
>Ontario-Canada
>
>teltek3@xxxxxxxxxxxx
>
>
>
>-----------------------------------------------------------------------
------
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
------------------------------------------------------------------------
-----
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
