[TechAssist] Re: RCA CTC 197CL Blows Speakers !

  • From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Tue, 28 Jan 2003 21:04:59 -0500

I have seen that happen on 175/176/177 chassis when the mute transistor was
disabled, and the unit was turned on at high volume{ ie} older customers
that do not hear so good, but have not had a 197 with that problem yet. You
may want to check out the mute circuits.
Phillip R. Hull    STET
phil245@xxxxxxxxxxxxx
----- Original Message -----
From: "Spacenut" <spacenut@xxxxxxxxxxxx>
To: "Tech Assist" <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, January 28, 2003 8:31 PM
Subject: [TechAssist] RCA CTC 197CL Blows Speakers !


>
> Make: RCA
>  Model: G32695LV
>  Chassis: CTC197CL
>
>  Problem: Blows Speakers.
>
>  Hi Everyone;
>
>   The above unit is a monster floor model that I repaired about 8 months
ago
> for no audio. What I found was that both speakers were open. replaced
> speakers set worked fine till last week when customer said they heard a
pop
> & no sound. speakers are open again. have chassis on bench & audio on test
> speakers is perfect no for the last week. I know if I replace speakers &
put
> back in service for customer it will come back to haunt me. Has anyone
seen
> this before in this chassis ? any help would be appreciated.
>
> Thank You,
>
> John Mikowich
> East Side Tv.
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.techassist.net/forms/change.html
>
>
>


------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.techassist.net/forms/change.html

Other related posts: