There is a tip for "looks like bad CRT and intermittent loss of video, relplace CB001 (.01 at 3KV) on CRT board". The pin #'s are; 9 and 10 filaments 6 grn K 11 blu K 8 red K 5 G1 7 G2 Screen grid V should be +233. I have had no history of bad CRT's. John. John Mielke Main TV Longmont Co ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: "tech assist" <techassist@xxxxxxxxxxxxx> Sent: Monday, April 25, 2005 11:27 AM Subject: [TechAssist] RCA 27F530T ITC008 FCS need print > This set looks like bad CRT. Need pinout of CRT. Screen voltage is low with > neck board on, and goes up with it off. Turned up the picture flashes > sometimes and stays dark others. The voltage varies with the darkness. Has > anyone run into bad CRT's in these? Can hear ticking inside neck while it is > flashing. Whole manual would be great. Thanks. > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > > > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/