Hello to all I have this ProScan PTV lightbox in my shop with the problem that only the red CRT lights up,the green and blue have the filament lit up but no output. My question to you all is,about the possibility that the Tripler could be the cause of it. I have only experienced that the Tripler fails to put out any high voltage but would it be possible that only one CRT gets the juice. I hope that it is the problem because of the low price for a 205064 Tripler. I would like your opinion on that question please' I look forward to your answer. Thank you in advance John With this I like to say thank you very much, to Jay Knoll for the S/M you send me, on a Zenith TV, A27A23W,for a no sound problem,and because of that I was able to solve the problem by driving a audio signal into the circuit and found IC 1400 to be defective which I have on order. Thanks again Jay John H Smit Smit's TV Service Box10 Gunnison Utah 84634 800-355-4948 Phone&Fax 435-528-7955 Phone&Fax jsm@xxxxxxxxxx ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/