Jamie, Yes. From Tech Repair CD: Pioneer\SDP50A3K\Set is in PD Shutdown and power supply appears to be defective but actually* only 4A fuse is blown\After fuse is replaced* the set will work but the fuse filament can be seen to bend momentarily at power on.\\\On AMP assembly-Resolder transistors and regulators that are mounted to the heat sink and replace one or both convergence output ICs (STK392-110).\\\\\\\\ Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Jamie " <jandkmay@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, February 23, 2004 9:47 PM Subject: [TechAssist] Pioneer TV SD-P50A3-K need convergence ic info I need to know if this set uses the STK392-110 convergence ic's. If not which one? Thanks Jamie Affordable TV Repair ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/