Change the convergence IC's. If that is the set that has the standup board with the amp's on it, they are bad. Seen it many times. Slow blow fuses will blow again unless you change amps. Perry Bower Electric Medic "It's Cheaper to Keep Her" http://www.electricmedic.com 3850 Washington Road Suite 4C Martinez, Georgia 30907 Phone: 706-8MEDIC4 (863-3424) Phone: 706-863-3474 Fax: 706-863-2316 mailto:info@xxxxxxxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Al Brown Sent: Friday, February 25, 2005 1:00 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Pioneer Big Screen SDP50A3K...Blowing fuse after 3 or 4 days Product: Pioneer PTV Model: SDP50A3K Problem: I had this set in the shop back in December..Came in dead...Found fuse FU105 (4 amp) blown.....I went all over the boards and resoldered numerous connections , replaced fuse and all was ok...Played in shop for a couple of days ok...Sent home and customer said it lasted about 4 days and took out fuse again...He replaced it himself and then called in 3 days and said it was gone again...Any ideas what might be causing this ?? Thanks Al Brown Largents Inc. 718 Main St. Lewiston, Id. 83501 208-743-8579 208-746-3426 Fax ---------------------------------------------------------------------------- - Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/