Dave, From Tech Repair CD: PIONEER\SDP50A3\UNIT SHUTS DOWN* RESISTORS ON AMP ASSEMBLY OVER HEATING\\\\DEFECTIVE CONVERGENCE CONTROL ASSEMBLY AND-OR AMP ASSEMBLY\\\\\\\\ Pioneer\SDP50A3K\Set is in PD Shutdown and power supply appears to be defective but actually* only 4A fuse is blown\After fuse is replaced* the set will work but the fuse filament can be seen to bend momentarily at power on.\\\On AMP assembly-Resolder transistors and regulators that are mounted to the heat sink and replace one or both convergence output ICs (STK392-110).\\\\\\\\ Pioneer\SDP50A3Q\Set is in PD Shutdown and power supply appears to be defective but actually* only 4A fuse is blown\After fuse is replaced* the set will work but the fuse filament can be seen to bend momentarily at power on.\\\On AMP assembly-Resolder transistors and regulators that are mounted to the heat sink and replace one or both convergence output ICs (STK392-110).\\\\\\\\ Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "TV Man" <tvman@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, March 17, 2004 11:45 AM Subject: [TechAssist] Pioneer B/S SD-P50A3-K Relay clicks, green light comes on then shuts down. I'm thinking the conv. ICs STK392-110. Is there a way of checking to make sure. I was thinking about unpluging the conv. yokes and see if the set would stay on. Am I on the right track? Thanks, Dave TV Man Inverness. Fl. 34451 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/